Product

topas® plus X

High speed cutting wire for Charmilles machines with X-technology Gamma phase EDM wire with up to 35% higher cutting speed as compared to plain wire and, at that, with high precision Developed specially for the X technology on Charmilles machines Can be used immediately without modifying the machine settings

more

microcut® CCA

For high demands in microerosion Combines the best properties of cobracut® and microcut®, thereby providing reproducible results with best surface quality, even in case of very small energy impulses Due to its high tensile strength and minimal tolerance of the wire diameter particularly suited for precise fine contours

more

megacut® type A

For highest precision on Japanese machines Zinc-coated precision spark erosion wire Suitable for extra-fine surfaces Excellent cutting results - particularly for carbide machining

more

boline PG

Excellent processing precision and surface smoothness; Special Zn treated on surface to ensure clean surface without dry linting; Uniform zinc coating to provide more stable discharge machining; Suited for machines for high precision machining.

more

boline P

Uniform surface coating; Stable processing performance to acquire optimum processing precision and surface smoothness; Good threading performance; Particularly suited for Agie Charmilles series machines.

more

topas® plus S

High speed cutting wire for Charmilles and other machines especially for taper cutting Soft gamma phase EDM wire Universally applicable on Charmilles machines Perfectly suited for taper cutting on all other machine types Up to 20% higher cutting speed as compared to plain wire

more

topas® plus H

High speed cutting wire for Agie and all standard Japanese machines Gamma phase EDM wire with high tensile strength Particulary suited for machines which require straightened wires for threading Up to 20% higher cutting speed as compared to brass wire

more

topas® plus G

Gamma phase wire for high cutting performance combined with highest precision on Agie machines Gamma phase EDM wire with high tensile strength Excellent surface quality and precision in contour and parallelism Up to 10% higher cutting speed as compared to brass wire

more

topas® plus D

Gamma phase wire for highest demand of cutting performance and process stability on Agie and Japanese machines Hard gamma phase wire, specially suited for tall parts For machines which require straightened wires for threading

more

topas® H.E.A.T.

High performance wire for Makino machines High performance EDM wire specially developped for Makino machines with H.E.A.T. option Double cutting speed with topas H.E.A.T. on machines with H.E.A.T. option in comparison to plain wire

more

microcut®

For sophisticated processing in microerosion A high-tensile steel core reliably sustains high wire pre-loads, even with the smallest diameters Functional layer composition for finest machining with absolute reproducibility

more

microcut® BR

For standard applications in microerosion This EDM wire is suited for reilable finish processing with medium level requirements.

more

megacut® type T

For tapered cuts on Japanese machines Spark erosion wire particularly suitable for high tapering Limited suitability for automatic threading

more

megacut® type HS

For EDM mass production on Japanese machines Improvement of megacut® type D The thicker diffusion layer of this spark erosion wire provides better removal performance Particularly suitable for economical EDM mass production

more

megacut® type D

For fast EDM mass production on Japanese machines Spark erosion wire with high-performance cutting characteristics due to its special coating Particularly effective when operating under poor flushing conditions (tall workpieces, interrupted cuts, staked parts)

more

megacut® pro

Special brass wire as the economical alternative for Japanese machines. Optimum process stability for Japanese machines Precise automatic threading Paraffin free, specially refined quality

more

megacut® plus

High cutting performance and precision on Japanese machines Immediate use in standard brass wire technology Very good wire threading Significant time and cost saving as compared to pure brass EDM wire High precision for demanding tasks Lower wire costs due to the possibility of reducing the wire run-off speed

more

cobracut® type W

Highest removal rates on latest EDM machines Suitable for all EDM machines. Highest cutting rate on EDM machines with most advanced high-power generators. Particularly suited for component production and machining of high workpieces.

more

cobracut® type S

High removal rates for EDM mass production Improvement of cobracut® type D: EDM wire electrode with better removal performance due to its thicker diffusion layer Particularly suitable for EDM mass production Suitable for automatic threading

more

cobracut® type G

For highest precision, even for steep taper cutting on AGIE-machines with toroid guide EDM wire electrode with harder surface than type A Particularly suited for taper cutting on Agie machines with toroid guides Excellent cylindricities, particularly with higher workpieces on machines of the Evolution and Vertex series

more

cobracut® type D

High removal rates on machines with D-technology EDM wire electrode developed for EDM machines with high-power generators High thermal and electrical conductivity For speed cutting as well as contour precision cutting Suitable for automatic threading

more

bercocut® pro 500

Soft brass wire Soft, paraffin-free brass EDM wire Suitable for taper cutting

more

bercocut® pro 900

Hard brass wire Hard, straightened brass EDM wire Paraffin-free grade Recommended for use on all Japanese machines

more

bercocut® spezial

Brass wire recommended for AGIE machines Hard, straightened brass EDM wire Recommended and homologated for all Agie machines

more

broncocut® type X

Fast and precise High-performance, multipurpose spark erosion wire with CuZn coating Particularly suited for precision cutting as well as high-speed cutting

more

cobracut®

For taper cutting Zinc-coated EDM wire electrode Particularly suitable for high tapering due to its high elongation Limited suitability for secure automatic threading

more

cobracut® type A

For highest precision Hard Zinc-coated EDM wire electrode For highest demands on reproducible precision and surface quality High strainghtness for proper automatic threading

more

cobracut® type AS

Your ticket to the A class Modified primary material Optimisation of the drawing and annealing process Reliable quality Excellent value for money

more

boline H

Possess stable cutting performance; Cutting speed is improved by more than 15% when compared with ordinary copper wires; Widely applied in machining of high precision tools and components.

more

boline H Plus

Possess stable cutting performance, standard prevision and surface quality (Ra 0.3μm); High performance CuZn40 core and CuZn alloy coating; higher cutting speed; Good automatic threading performance; Strong universality. Particularly suited for machining of thick, large tooling and components.

more

boline FG

High speed cutting wires are applicable for customers with requirements on processing efficiency; With special plating structure, its cutting speed is above 25% higher when compared with copper wires; Relatively good automatic threading performance; Particularly suited for mass type machine tools such as Shaddick, Mitsubishi and Qinghong.

more

boline F

High speed cutting wires are applicable for customers with requirements on processing efficiency; With special plating structure, its cutting speed is above 20% higher when compared with copper wires; Good automatic threading performance; Obviously improve processing speed on mass type machine tools.

more

Technical solutions

bedra
Leadership in Global precision EDM Wire

Here you find the right wire

News

  • Cutting the world, creating the future
    2018

    01-04

    Cutting the world, creating the future

    On Oct. 27, 2016, bedra&Mitsubishi Partnership Workshop was held in the multi-function hall on the ground floor of group building. A team with nearly 50 experts from Berkenhoff in Germany, Mitsubishi headquarter in Japan, Shanghai Mitsubishi and domestic partners of Mitsubishi participated in this workshop. Meanwhile, this workshop also invited the Executive Vice Secretary-General of the Non-Traditional Machining of China, Xu Junliang.
    more
  • The delegation led by the vice premier of the state council, Ma Kai, visited Bedra Asia Production Base for investigation and survey
    2018

    01-04

    The delegation led by the vice premier of the state council, Ma Kai, visited Bedra Asia Production Base for investigation and survey

    Sep. 21, 2016, A.M., member of CPC Central Committee Political Bureau, vice premier of the state council, Ma Kai, visited Bedra Asia Production Base for investigation and survey, accompanied by minister of the National Ministry of Industry and Information Miao Wei, Director of SASAC Xiao Yaqing, vice director of NDRC Lin Nianxiu, member of the standing committee of Zhejiang com Ningbo municipal party secretary, acting mayor Tang Yijun and vice governor of Zhejiang province Zhu Congjiu.
    more
  • Bedra made a stage pose on EMO Hannover 2017

    Bedra made a stage pose on EMO Hannover 2017

    2018-01-04
    The endsville event for metal processing industry in the world - EMO Hannover 2017 metal processing world returns back to Hannover four years after and was held in Hannover Exhibition Center of Germany from Sep. 18-23, 2017.
    more

TOP

Product

bedra-A

bedra-G

Company

About Berkenhoff

history

Research & Development

Production

Quality

News

News

Exhibition

Technical solutions

Technical solutions

service support

Contac us

Copyright © 2016 Berkenhoff GmbH., Ltd.All Rights Reserved.